3 Tips For Planing Your Next Roofing Project

Roofing maintenance and replacement is one of those projects that homeowners often attempt to do themselves. While at first glance a roofing project seems easy to do, it takes some planning and preparation to make sure the job goes smoothly. Keep reading to learn a few tips on how to properly and thoroughly plan out your next roofing project:

Check Local Building Codes

Before you do anything, you need to visit your town hall or city hall and obtain the current building codes that pertain to roofing. Specifically, you want to reach out to your local building inspection department, office of planning and zoning, and/or department of permits to find out the current building codes in effect in your area.

In a nutshell, building codes are developed by people who are actively involved in the construction industry. The purpose for having building codes is to provide minimum standards to protect people, their property, and the environment, as well as provide safety and welfare to the owners and occupants of a residential building. Building codes vary by state, county, town, city, and borough, and they are always changing. A new code book is typically printed every 3 years, but building codes can change as often as local officials want. 

Create A Materials List

Creating a materials list now will ensure you have all the right tools and supplies on hand before you start your next roofing project. Your list should include items such as shingle style and color, flashing, drip edge, roof vent cans, tar paper, ice dam barrier, nails, roofing nailer, ladder, and scaffolding if your roof pitch is very steep.

Once you've created your list, you need to figure out how much material you'll need for your roof. This can be done with an easy calculation. First, calculate the roof's pitch, which is the rise over the run. You can record the measurement of the slope of your roof by placing an inclinometer on the top ridge, or use an online pitch calculator.

Then, you need to figure out the square footage of your roof. To do this, measure all sections of your roof, including overhangs, valleys, hips, ridges, rakes, and eaves. Use a roof pitch factor chart to determine how much you need to add to the square footage. Divide that total number by 100 to figure out how many 10-inch by 10-inch square roofing material you'll need to complete your roofing project. There are countless roof calculators and guides online that can assist you with these calculations.

Don't forget to also estimate the amount of tear-off debris you'll be handling during your roofing project, and figure that in when writing your supplies list.

Recycle And Properly Dispose Of Roofing Material

Last, but definitely not least, you need to have a plan for recycling or otherwise properly disposing of roofing materials as they come of the old roof. Many homeowners will rent a dumpster and have it placed right next to the roof so shingles, old tar paper, and other supplies can be dumped right in as they go. Then, the dumpster rental company will come and take it all away. If you prefer to recycle as much as possible, you'll need to pre-sort all materials into different piles as they are removed from the roof.

For example: keep nails, shingles, and felt or other asphaltic underlayments in a separate pile for recycling. Keep wood, metal, and other job-site debris in another pile. Some recyclers will let you put these materials onto top of the shingles, as long as it's easy for them to separate the materials. Call your recycler for specific details on how they like to receive materials.

With these 3 tips in mind, your next roofing project will be a breeze. If you do have questions, you can contact your local building inspector. If you prefer to leave it up to the professionals, hire a licensed and experienced roofing contractor, like those at http://www.conradroofing.com, to handle all your roofing projects, from small repairs to roof replacements. 


Share